Fisher & Paykel OR48DDPWGX Guide D'utilisation page 31

6
CORRECT REPLACEMENT
OF THE RAPID BURNERS
It is very important to check that the
burner flame spreader "F" and the cap
"C" have been correctly positioned (see
C
figs. 6.1 and 6.2 ).
Failure to do so can cause serious
problems.
In appliances with electric ignition, check
that the electrode "S" (fig. 6.1) is always
clean to ensure trouble-free sparking. F
Check that the probe "T" (fig. 6.1) next
to each burner is always clean to ensure
correct operation of the safety valves.
T
Both the probe and ignition plug must
be very carefully cleaned.
S
Fig. 6.1
Fig. 6.2
CORRECT POSITION OF
TRIPLE RING BURNERS
The triple ring burner must be correctly
positioned (see fig. 6.3); the burner rib
must be fitted in their housing as shown
by the arrow.
The burner correctly positioned must not
rotate (fig. 6.4).
Then position the cap A and the ring B
Fig. 6.3
(fig. 6.4 - 6.5).
A
B
Fig. 6.5
Fig. 6.4
31