Schneider LED65-SCP200K Manuel D'utilisation page 68

Remark: Depending on the capacity of the device, the reading can take
more than 1 minute before launching the video.
The unit cannot read my USB device.
- Once you have plugged your device to the unit, you may need to
switch on the USB device before it can operate.
- This unit does not support a direct USB connection with a computer.
You need to use a USB device, a MP3 player or a PMP (Portable
Multimedia Player with hard disk).
- If you are using a USB external hard disk: you need to connect your
device simultaneously to an external power source and to the unit. If
you are using a self-powered PMP, make sure that the battery is
sufficiently loaded.
- Check that the files system of your USB device is formatted into the
FAT or FAT 32 format. USB device formatted into NTFS are not
compatible with this unit. Caution: if you attempt to modify your file
system, formatting your device will erase all data. Please refer to your
USB device's instruction manual first.
- Warning: Connect your USB device directly to the USB port of the
device. Using an extension cable is not recommended and may
cause interference and failure of data transfer.
67