Toto TLK03001G Manuel D'installation Et Guide D'utilisation page 22

PERIODIC MAINTENANCE - Inside the Tank
In order to use the product comfortably, clean the inside of the tank using
the following procedure.
[ 3L Tank Type ]
1. Remove the cap nut and pull out the float
switch and the tank joint from the tank.
Note
Store the float switch and the tank joint in a
bucket, etc. to avoid dust adhering to it.
2. Remove the bracket.
If the tank is anchored on the floor or the
wall, turn the decorative screw by hand and
dismount the tank.
3. Wash the tank.
4. Put the tank back in the original position.
5. Put back the float switch and the tank joint.
Note
Mount the packing between the tank joint and
the tank without fail.
6. Mount the tank to the bracket for anchoring.
Bracket
Decorative screw
Float switch
Tank
Decorative
screw
22
Float switch
Tank joint
Tank
Cap nut
Tank joint
Cap nut