Operation; Adjustment Knob - CARVIN SANICLEAR 40 Manuel D'installation Et D'opération

OPERATION

The SANICLEAR chlorine generation system is an automatic machine for pool & spa sanitation. The operation
requires a low concentration of salt (sodium chloride) in the pool water at levels low enough that it normally cannot be
tasted. It automatically sanitizes your pool by converting the salt into free chlorine, which kills bacteria and algae in the
pool through a process called electrolysis.
The SANICLEAR 40 chlorine generator system is designed to handle the average swimming pool up to 45,000 gallons
(170,000 liters). The actual amount of chlorination required to properly sanitize a pool varies depending upon bather
load, rainfall, air temperature, and water temperature, pool's exposure to sunlight, pool's surface and cleanliness.
The maximum output of hypochlorus acid is equivalent to 0.54 kg per day. Check with your local code for other
restriction.
Note: It is not recommended using the salt chlorinator to generate bromine.
If your pool has natural stone as coping or decking, please check with a stone installation specialist for the maintenance
of the stone before installing the salt chlorinator.
DESIRED LEVEL ADJUSTMENT KNOB
This setting is used to control the percentage of time the SANICLEAR system will produce chlorine. Adjust this setting
to increase or decrease the chlorine output duration. The reading is from 5 percent output to 100% output chlorine
production duration of the SANICLEAR system.
For example; if the adjustement knob is at 60%, the SANICLEAR system will produce chlorine (at its top rate) during
60% of the time, the other 40% of the time, the SANICLEAR system will not produce anything.
M10077A