Publicité
Les langues disponibles
Les langues disponibles
4. How To Set The Unit
To select any of the given functions, press the MENU button up to the required one is shown
on the display. Select the function by ENTER button and the display will blink. Use DOWN
and UP button to change the mode. Once the required mode has been selected, press the
ENTER button to setup or it will automatically return to the main functions without any
change after idling 10 seconds. To go back to the functions without any change press the
MENU button. The main functions are shown below:
DMX 512 Address Setting
1. Tap the either the MENU, UP, or DOWN buttons until "ADDR" is displayed, press
ENTER.
2. "
" will now be displayed . Press the UP or DOWN buttons to ind your desired
address.(
to
) Leave the display on this address, and after a few seconds
the address will be saved into memory.
This will let you set unit as a master or slave in a master/slave
configuration.
13
Publicité
