Channel Search - Xoro HRT 7510 Manuel D'emploi

Channel Search

The setting Channel Search includes the options:
• Auto Search
• Manual Search
•
Country
•
Antenna Power
Auto Search
Enabling this option will start the automatic
search of itself, the language and country
parameters are taken from the default settings.
Please read from page 14 in this manual.
Manual Search
If you find a TV channel or multiple TV channels
were not found, then you have the opportunity to
start a manual scan.
Depending on the country selection appears
different in the channel name, frequency and
bandwidth values. At a National Election by
Germany, the channel name (frequency channel)
begins with "10", a frequency (MHz) of 212.5 and
a bandwidth of 7 MHz.
Only with channel "21" changes the bandwidth to
8 MHz.
Using the ◄ / ► keys to change the channel name (frequency channel).
If you have selected a channel, then you can watch at the quality level (quality), be it in general
receive a signal on that channel. If (the quality level quality) not 0% is displayed, then most likely no
TV station will be located.
Restart the manual search, where you press the OK button.
Now the window switches to the search and the search results are displayed.
Country
Using the ◄ / ► keys to change the country.
Antenna Power
With this option you can activate voltage at the antenna output on or off.
Settings
HRT 7510
27