Aed9501A Basic Device - HBM AED Serie Guide Rapide

AED System Digital Transducer Electronics

6.5 AED9501A basic device

The AED9501A basic device extends the functionality of the AD amplifier
board and provides:
• mechanical protection (IP65)
• a slot for the AD103C amplifier board
• a voltage supply for the amplifier board and transducer excitation (5 V
(electrically isolated)
• total transducer bridge resistance u 80 Ω ... 4000 Ω
• an interface for CANopen and DeviceNet (electrically isolated from the am-
plifier)
• Diagnostic bus
• Digital input IN1
• EMC protection
Load cell
connection
Amplifier connection
AD103C
Fig. 8: Mechanical construction of the AED9501A (for pin assignment and setup, see sticker in lid)
A1780−4.3 en/de/fr/es/it
Bus termination
Interface, power supply
Interface
and trigger input terminals
settings
15
)
DC
HBM