Before Initial Operation; Temperature Setting; Operation Parameters - Schaub Lorenz SL300B CB Mode D'emploi

4.1 Before initial operation

1. Clean the appliance thoroughly. Be very careful especially inside the appliance.
2. After having installed the appliance wait 4-6 hours before you connect it
to the mains.
3. Set the thermostat to position 3 or 4.
4. Afterwards operate the appliance after 24 hours for the first time.
5. The temperature of the freezer should reach -18
the exact temperature of the cooling and freezer compartments using a suitable
thermometer 5 .
WARNING THE THERMOSTAT CONTROLS THE COMPRESSOR
ONLY. You must unplug the appliance to disconnect it from the mains.

4.2 Temperature setting

1 Warmest setting
3/4 Recommended setting for daily use at an average ambient
temperature of 16°C to 38°C.
7 Coldest setting

4.3 Operation parameters

1. The appliance can only reach the relevant temperatures when:
a. the a ambient temperature meets the climatic class.
b. the doors close properly.
c. you do not open the doors too often or too long.
d. the door seals are in proper condition.
e. the appliance is properly positioned.
f. you have not overfilled the appliance.
g. you do not store warm or hot food in the appliance.
2. High ambient temperatures and simultaneously operating at the coldest setting
may make the compressor operate permanently to keep the temperature
constant inside the appliance.
Not included in delivery
5
C or colder. You can check
0
27