Multi-Pairing; Re-Connecting With A Bluetooth Device - SONIXX X-FIT Mode D'emploi

Multi-pairing

The headset can connect with two devices at most. One is a Bluetooth phone
supporting HFP profile, the other one is a Bluetooth music device supporting A2DP
profile. If you want to set-up multi-pairing, please refer to the following steps:
1. Firstly, pair the headset with a Bluetooth transmitter (refer to "Pairing with a
Bluetooth transmitter")
2. Turn off the Bluetooth transmitter
3. Pair and connect the headset with a Bluetooth mobile phone (refer to "Pairing
with a smartphone / mobile / PDA etc.")
4. Turn on the Bluetooth transmitter again, it will connect to the headset
automatically
Notes:
• After successful multi-pairing, the paired devices will remember each other.
Unless pairing information is deleted because of a new pairing, they will not
need to pair next time. If the pairing information is deleted, please connect the
mobile phone with the headset first and then turn on the Bluetooth transmitter,
multi-connecting can be performed.
• For mobile phones supporting the HSP and A2DP at the same time, it may set
up HSP and A2DP connections with the headset simultaneously. At this time, the
Bluetooth transmitter may not connect to the headset.

Re-connecting with a Bluetooth device

Automatic connecting - every time the headset is turned on, it will connect to
1.
last connected device automaticallyManual connecting
2. When the headset doesn't connect to a device supporting HFP, double click
MFB button, it will connect to last connected HFP device.
3. When the headset doesn't connect to a device supporting A2DP, Long press
–button for 2 seconds, it will connect to last connected A2DP device.
Notes:
• Before connecting to a Bluetooth device, please turn on the Bluetoth device's
Bluetooth function.
• On some Bluetooth devices, take some Nokia mbile phones for example, you
have to allow automatic connecting in the mobile phone's settings. Please refer
to your phone's manual for further information.
10