Getting Started; Water Tank - Cafe C7CEBBS3RD3 Manuel D'utilisation

Getting Started

Drip Tray
■ Remove the drip tray from the packaging and attach it to the front of the espresso
machine, under the coffee spout.
NOTE: There are magnets that will allow the drip tray to attach to the machine.

Water Tank

■ Remove the water tank and fill it with water. Replace in
the machine before using any functions.
■ Rinsing Cycle: The machine will rinse automatically at
every power ON. After the machine is preheated, it will
dispense a small amount of hot water directly into the
drip tray. This is to keep the machine clear of coffee
residue. Machine will only rinse if it was Powered ON
from cold state.
■ NOTE: DO NOT add hot water to the water tank. This
could damage the appliance.
Coffee Bean Container
■ Lift the lid located on the top of the espresso machine and fill it with
coffee beans. Close the lid tightly when finished. Make sure rubber seal
is closed completely.
NOTE: When grinding is in process, turn the coffee bean dial to your
desired grind size.
NOTE: It may take several tries to get a grind size that best fits your taste.
Ready to Use!
■ Plug in your espresso machine. The Power button will flash. Press the power button.
■ Choose your desired function and enjoy! See the "Using the Espresso Machine" section for
instructions of each function.
6
Water Tank
Coffee Bean
Container