Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
ES 5941
6.11
Total fault message
Total fault message
Operating instructions
46
The total fault message output is non-floating (relay L5 (Error): 230V
AC). The total fault message is triggered as soon as an error occurs in
the controller. In order to identify the error in question, it is necessary
to check the controller display. The logic of the relay switching can be
defined with the parameter KOM03. The total fault message is a local
function. With regard to cascade operation, each station needs to be
connected individually as slave stations do not relay their error mes-
sages to the master.
Functions
04/2021 Item no. 215790 EA no. 1321
Publicité
Chapitres
Table des Matières
