Info And Menu Parameters - Taconova ES 5941 Manuel D'utilisation

Info and menu parameters

5 Info and menu parameters
Info level
Submenu
STA STATUS
PRI PRIMARY
SEK SECONDARY
AUS REPORTING
Menu level (control parameters)
Submenu
BAS BASIS
PAR SET VALUE
ZIR CIRCULATION
SCH LAYERED ARRANGEMENT
DES THERMAL DISINFECTION
NAC RECHARGING
WHF WARM HOLDING FUNCTION
KOM COMMUNICATION
STE CONTROLS
MAN MANUAL
KAS CASCADE
COD CODE
04/2021 Item no. 215790 EA no. 1321
The information values and parameters are located
in submenus. The brief description of the parameters
indicates the submenu in which the parameter can
be found.
Content
Overview of the operating status of the stations and activation of
pumps and valves.
Measured values and setpoints on the primary side.
Measured values and setpoints on the secondary side.
Data for the operating hours, energy consumption and flow rates.
Content
Basic settings.
Parameters for the hydraulic options:
Parameters for circulation mode.
Parameters for return flow switch.
Parameters for thermal disinfection.
Parameters for the heat request from the heat source.
Parameters for heat exchanger warm holding.
Language, fault messages and bus settings.
Parameters for controlling the station.
Settings for manual operation.
Parameters for cascade configuration.
Code input for activating protected parameters.
Operating instructions
ES 5941
23