Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Depending on the USB device, the operating system detects new hardware and in-
stalls the required drivers. Please refer to the operating instructions of the USB device
to know how to do this.
For example, Windows already uses its own drivers for many devices, such as for USB
flash drives, USB mice, etc.
Important!
According to the USB3.0 standard, a USB3.0 ports supplies a current of
900 mA (e.g. the USB3.0 port of your computer).
However, many USB3.0 devices only require a much lower current, e.g. USB
sticks. Other USB3.0 devices are powered by their own power adapter (e.g.
large USB3.0 hard drives).
The USB power output can supply a max. output current of 2.4 A.
Note that the power adapter provided cannot supply all outputs with the
maximum possible current at the same time. The output power of the power
adapter provided is 60 W, of which about 59 W are available for all con-
nected USB devices (USB ports 1 - 13 and the USB power outputs).
Charge function
The USB power output (black USB socket) on the USB3.0 hub supplies a current of up
to 2.4 A. Hence, not only smartphones can be connected here (they usually require a
charging current between 0.5 and 1 A) but also tablets with higher current require-
ment.
Use the USB charging cable provided with your smartphone or tablet to connect it to
a USB power output.
Since the charging electronics are integrated in the smartphone or tablet, the charg-
ing process is controlled and completed by the smartphone or tablet.
The USB power output is active only when the USB3.0 hub is switched on.
Tips and notes
• The USB3.0 hub is USB2.0 and USB1.1 compatible. This means that normal USB2.0
and USB1.1 devices can be used without any problem on the USB3.0 hub. However,
this will not speed up the USB2.0/USB1.1 devices.
• In order to take advantage of the high speed provided by USB3.0, all the devices
must support USB3.0: The USB device itself (e.g. an external hard disk), the USB hub
and the USB controller in the computer.
• The theoretical maximum speed for USB3.0 (or also USB2.0 or USB1.1) is never
achieved in practice. This is due to protocol information, simultaneous operation of
several USB devices or the speed limit of the connected device or the USB control-
lers/motherboards.
It also makes little sense to simultaneously operate 13 hard drives via the USB3.0
hub, as those will share the possible volume of data transmission between the
USB3.0 hub and computer.
If, for example, a lot of data is to be transferred between two USB3.0 hard drives,
connect the first hard drive to the USB3.0 port on the USB3.0 hub and connect the
second directly to a USB3.0 port on the computer.
• Normally USB operation is not possible in DOS or in the protected mode of older
Windows versions. Depending on the computer or the BIOS/Setup, however, opera-
tion of a USB keyboard and a USB mouse is possible. Nevertheless, it is necessary
to connect them directly to the computer's USB interface and not to the USB hub.
• USB devices can be connected and disconnected during operation. You do not have
to switch off your computer if you want to insert or remove devices.
If data transfers are in progress on the USB port, e.g., if an external disk is writing
data to the computer, and you unplug the USB plug, the operating system might
crash. Furthermore, loss of data or damage to the file system of the external drive
can be the result.
The same applies when you press the switch on/off button of the USB3.0 hub.
• With Windows
XP, Vista™, 7, 8, an icon with an arrow in the menu bar is displayed
®
for some USB devices (e.g. for a USB hard disk). With this function you can "discon-
nect" the USB device from the computer so that no data transfer occurs any longer.
Afterwards, the USB device can be disconnected from the USB3.0 hub (or the com-
puter) without problems.
Maintenance and cleaning
The product is maintenance-free. Repair or maintenance work must be carried out
by a specialist.
You can use a clean, dry, soft cloth for cleaning. Dust can be very easily removed with
a soft, clean brush and a vacuum cleaner.
Do not use aggressive, chemical or scouring cleaning agents, as this may lead to dis-
colouration or changes in the material on the surface.
Disposal
The product must not be disposed of in the household waste.
Dispose of the product at the end of its serviceable life in accordance with
the current statutory requirements; e.g. return it to any suitable collection
point.
Technical data
a) USB hub
Operating voltage............................... 12 V/DC
USB standard...................................... USB3.0 (compatible with USB2.0 and USB1.1)
Number of USB3.0 ports ................... 13
Number of USB power outputs........ 1 (output current max. 2.4 A; output voltage 5 V/DC)
On/Off switch ...................................... yes
Wall mount .......................................... yes
Ambient conditions ............................ Temperature -5 °C to +45 °C, air humidity 20% to
Dimensions (L x W x H) ..................... 122 x 45 x 20 mm
Weight .................................................. 120 g
b) Power adapter
Operating voltage............................... 100 - 240 V/AC, 50/60 Hz
Output................................................... 12 V/DC, 5 A
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent
the technical status at the time of printing.
© Copyright 2015 by Conrad Electronic SE.
80% relative, not condensing
Publicité
Table des Matières
