PLAYKIN FASTER Mode D'emploi page 55

ATTACH THE HANLEBARS
2
Attach the handlebars
Connectors for units
1
Power connectors
1. Connect the connectors of the sound unit to each other. Plug the power supply connectors
together.
2. Place the handlebar assembly on the vehicle body.
3. Insert the M10x190 bolt through the hole in the steering rod assembly, the hole in the vehicle
body and pull it out through the hole in the bottom of the hand rod assembly.
4. Tighten a Ø10 lock nut on the end of the bolt with a wrench.
sound
55
3
Bottom view
4
Screwdriver
EN