PLAYKIN FASTER Mode D'emploi page 52

CONNECTING THE SHOCK ABSORBER TUBES AND BRAKES
1. Slide the absorber tubes over the front
fork tubes.
2. Slide the brakes onto the front fork tubes.
MOUNTING THE FRONT WHEEL
1. Tighten a Ø10 safety nut to the end of the front axle.
2. Slide a Ø10 washer onto the front axle.
3. Insert the front axle through the hole in the front fork, slide the wheel cover towards the front
axle.
4. Slide a front wheel over the front axle.
5. Slide the wheel cover over the front axle.
6. Push the front axle until it passes through the hole on the other side of the front fork. Slide a
Ø10 washer towards the front axle.
7. Tighten a Ø10 lock nut on the end of the front axle with a pipe wrench.
Front fork
tubes
1
2
52
1
2