ASROCK P43C-ME Mode D'emploi page 24

Using SATA / SATAII HDDs with NCQ function
STEP 1: Set Up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set "SATAII Configuration" to [Enhanced], and then in the option "Configure
SATAII as", please set the option to [AHCI].
STEP 2: Install Windows
system.
Insert the Windows ® 7 / 7 64-bit / Vista
drive to boot your system, and follow the instruction to install Windows
TM TM
/ Vista / Vista 64-bit OS on your system. When you see "Where do you want to
install Windows?" page, please insert the ASRock Support CD into your optical drive,
and click the "Load Driver" button on the left on the bottom to load the Intel
drivers. Intel ® AHCI drivers are in the following path in our Support CD:
.. \ I386 (For Windows
.. \ AMD64 (For Windows
After that, please insert Windows
the optical drive again to continue the installation.
2.9 2.9 2.9 Untied Overclocking T Untied Overclocking Technology Untied Overclocking T
2.9 2.9 Untied Overclocking T Untied Overclocking T
This motherboard supports Untied Overclocking Technology, which means during
overclocking, FSB enjoys better margin due to fixed PCI / PCIE buses. Before you
enable Untied Overclocking function, please enter "Overclock Mode" option of BIOS
setup to set the selection from [Auto] to [Manual]. Therefore, CPU FSB is untied
during overclocking, but PCI / PCIE buses are in the fixed mode so that FSB can
operate under a more stable overclocking environment.
Please refer to the warning on page 8 for the possible overclocking risk
before you apply Untied Overclocking Technology.
2 4 2 4 2 4
2 4 2 4
Advanced screen
® TM
7 / 7 64-bit / Vista
TM / Vista TM
® 7 / Vista TM OS)
® TM
7 64-bit / Vista 64-bit OS)
®
7 / 7 64-bit / Vista
echnology echnology echnology
echnology
ASRock P43C-ME Motherboard
Storage Configuration.
TM
/ Vista 64-bit OS on your
64-bit optical disk into the optical
®
7 / 7 64-bit
®
TM TM
/ Vista 64-bit optical disk into
AHCI