ASROCK P43C-ME Mode D'emploi page 14

Table des Matières

2.3 Installation of Memory Modules (DIMM)

This motherboard provides two 240-pin DDR2 (Double Data Rate 2) DIMM slots

and two 240-pin DDR3 (Double Data Rate 3) DIMM slots, and supports Dual

Channel Memory Technology. For dual channel configuration, you always need

to install identical (the same brand, speed, size and chip-type) DDR2/DDR3

DIMM pair in the slots of the same color. In other words, you have to install

identical DDR2 DIMM pair in Dual Channel (DDRII_1 and DDRII_2; Yellow slots;

see p.2 No.5), or identical DDR3 DIMM pair in Dual Channel (DDR3_A1 and

DDR3_B1; Blue slots; see p.2 No.6), so that Dual Channel Memory Technology

can be activated. You may refer to the Dual Channel Memory Configuration Table

below.

Dual Channel DDR2 Memory Configurations

2 memory modules SS

2 memory modules DS

Dual Channel DDR3 Memory Configurations

2 memory modules SS

2 memory modules DS

If you want to install two memory modules, for optimal compatibility

and reliability, it is recommended to install them in the slots of the

same color. In other words, install them in the set of blue slots

(DDR3_A1 and DDR3_B1), or in the set of yellow slots (DDRII_1

and DDRII_2).

If only one memory module is installed in the DIMM slot on this

motherboard, it is unable to activate the Dual Channel Memory

Technology.

It is not allowed to install a DDR3 memory module into DDR2 slot or

install a DDR2 memory module into DDR3 slot; otherwise, this

motherboard and DIMM may be damaged.

DDR2 and DDR3 memory modules cannot be installed on this

motherboard at the same time.

1 4

(DS: Double Side, SS: Single Side)

DDRII_1

(Yellow Slot) (Yellow Slot)

(DS: Double Side, SS: Single Side)

DDR3_A1

(Blue Slot)

ASRock P43C-ME Motherboard

DDRII_2

DDR3_B1

(Blue Slot)

Table des Matières