Power Sources; Radio Operation; Aux-In Operation; Usb/Sd Operation - Roadstar HRA-1345NUSWD Manuel D'instructions

POWER SOURCES

AC POWER: To power your radio, plug the AC power cord into into a wall AC power
outlet. Check that the rated voltage of your appliance matches your local voltage.
TO USE THE RADIO
1. Move the [FUNCTION SELECTOR] (1)
2. (Please see detailed instructions for each Source in the following chapters);
3. Adjust the volume with the [VOLUME KNOB] (2) to the desired
4. Move the [FUNCTION SELECTOR] (1)

RADIO OPERATION

1. Set the [FUNCTION SELECTOR] (1) to "FM" mode;
2. Adjust the frequency to your desired station by using the [TUNING KNOB] (5).
Note: For a better reception, reorient the antenna (4).

AUX-IN OPERATION

1. Set the [FUNCTION SELECTOR] (1) to "AUX" mode;
2. Use one male to male 3.5mm jack cable (not included) to connect any external
audio device to the [AUX-IN SOCKET] (7).
Note: Music control (play, pause, etc) must be done from your external device.

USB/SD OPERATION

1. Set the [FUNCTION SELECTOR] (1) to "AUX/USB/SD" mode;
2. Plug an USB / SD stick into the
3. Playback will start automatically from the first track.
Note: Some mp3 player may not be able to play via the usb socket. this is not a mal-
function of the system.
Note: To avoid damage to USB/SD memory, remove it only when the radio is OFF.
to the desired;
to OFF to turn OFF the unit.
[USB/SD PORT] (8/9);
English
level;
2