Quax TRENDY 7F033.18853 Manuel page 35

TRENDY
54 01 41xxXL
4. Assembling the babybed
Needed parts : the leg parts 5, 6 and 7A/B, both end panels 2, both sides 1, both bottom panels 4 and
the bottom 3
Step 1 : Use both long crossbars 6, both short crossbars 5, eight eccentrics H, the four legs 7A and 7B
and eight connectors G
Push two eccentrics (H) in the provided drillings on the inside of the long crossbars (6) and the short cross-
bars (5). Tighten two connectors (G) in the provided holes on the inside of the legs (7A and 7B).
Step 2 : Use the parts of step 2
Push a leg (7A and 7B) with its connectors into the holes and over the wooden dowels of short crossbars
(5). Tighten the eccentrics. Push the leg frame with his connectors in the drillings and on the wooden do-
wels of the long crossbars (6). Tighten the eccentrics. Repeat with the other leg frame.
Omvormbaar bed 140x70 cm
Konvertierbar Bett 140x70 cm
Lit convertible 140x70 cm
Convertible bed 140x70 cm
Quax Quax
First dreams First dreams
® ®
First steps First steps
35