ENGLISH
4. Using the FM Transmitter
The FM transmitter enables you to enjoy the music from an external
audio source (MP3 Player, I-Pod, Disc-Man, etc.) on your FM radio. The
external audio source should be connected to the FM transmitter through
the line-in cable and the FM transmitter transmits the audio signal to
your FM radio.
1.
Open the battery compartment on the back of the device and insert
the 2 AAA batteries. Close the battery compartment.
2.
Connect the Line-In cable to the headphone / line-out jack of your
external audio source.
3.
Turn on your audio source and your FM radio.
4.
Turn on the FM transmitter by pressing the
seconds.
5.
Start the playback on your audio source.
6.
Press the "CH
a free FM frequency that can be used.
7.
Tune your FM radio to the frequency selected on the FM transmitter
to listen to the music through your FM radio.
Note:
When the music pauses or stops for about 50 seconds, the device
will de-activate to save power. Turn on the device again with the
/ POWER button to continue the use of the device.
" or "CH
" buttons on the FM transmitter to find
9
/ POWER button for 2