Controls
A
Understanding the
Indicator
Light status
indicator
ID
indicator
B
ID
indicator and
Lit green
Registration with the main monitor is complete and the
repeater can send signals.
Flashing
Signals are being sent.
green
Lit orange
Signals are not being sent.
Flashing
Currently registering to the main monitor.
green
Off
Not registered to the main monitor.
Lit green
Lit orange
Lit red
Flashing red
Signals do not reach the repeater and it should not be installed
in this location. (Out of range.)
C
indicator
Indicates the signal level of the main
Strong
monitor.
R Determine the installation location of
Weak
A
indicator
B
ID
indicator
C PROGRAM
Meaning
the repeater by checking the signal
level shown with the indicator.
7