TEFAL PREP'LINE 81410E32 Mode D'emploi page 18

Removing beaters or mixers
Once stopped, unplug. In position 0, push the eject button (c) forward to eject the beaters or
mixers.
Stop the mixer on position 0, disconnect the appliance and unscrew the blender shaft, turning it
clockwise.
Cleaning
1. Make certain that the appliance is correctly unplugged.
2. Clean the beaters, mixers or blender shaft immediately after use to keep
the remaining oil or egg mixture from sticking or drying out.
3. You can clean the accessories under the tap with a sponge and washing
up liquid.
- They can also been washed in the dishwasher.
4. Clean the body of the appliance using a moist sponge only and dry
carefully.
5. Never wash the appliance in the dishwasher.
6. Do not use abrasive sponges or objects with metal parts.
7. Never immerse the motor unit in water. Wipe with a dry or barely
moistened cloth.
For any product problems or queries, please contact our Customer Relations Team first for expert
help and advice:
HELPLINE
0845 6021454 – UK
(01) 461 0390 – Ireland
or consult our website – www.tefal.co.uk
Electrical or electronic product at end of
service life
Removing the blender shaft
Do your part to protect the environment!
Your appliance contains valuable materials which can be recovered or
recycled.
Take it to a local civic waste collection point.
15
Caution:
The blender
shaft has a very
sharp blade.
Precautions must
be taken when
cleaning it.