Care And Maintenance - oneConcept 10031564 Mode D'emploi

ANTI-SKIP PROTECTION
This player incorporates an electronic anti-skip circuit to prevent interruption of the sound
output when the unit is subjected to shock, vibration or rolling during disc playback. The
anti-shock system will automatically activate when a disc is playing, the ESP indicator will
appear in the display and flashing.
Once anti-skip buffer is full, it will give you approximately 60 seconds of protection against
interruption of sound output. If the player is subjected to shock or rolling for longer than
the buffer memory, some interruption of sound output will occur. This is normal and to
be expected and the sound will resume once the player has stabilized from the shock or
rolling disturbance.
Note: The anti-skip function provides for continuous sound output when the unit
is subjected to shock or vibration. It will not compensate for errors arising
from the use of defective, scratched or dirty discs.
Clean the unit with a soft, damp (never wet) cloth. Solvent or detergent should never be
used.
During CD play, or if the CD fails to play at all, its bottom surface may require cleaning.
Before playing, wipe the disc from the centre outwards with a lint-free soft cleaning cloth.
Attention: Never allow any water or other liquids to get inside the unit while clean-
20

Care and Maintenance

ing.