EHEIM 6064 Mode D'emploi page 14

• Without fail, observe the operating instructions of the
other C0
4. Operating Principle
The C02 supply for aquarium plants can be controlled automatically with the EHEIM
C02 solenoid valve:
A 6064 (230V AC):
The C02 supply is switched off overnight by a timer switch*.
Connect the solenoid valve that controls the aquarium lighting to the timer
switch*.
B 6064380 (24V DC):
With a timer switch* that controls an EHEIM powerLED+*.
C 6064380 (24V DC):
With an EHEIM LEDcontrol+* light controller that regulates the
EHEIM powerLED+* lamps.
*Not included in the scope of supply
5. Installation Example
A CO
2
CO
2
unit, for example, a diffusor
CO
B
2
CO
2
feed unit, for example, a diffusor
EHEIM power supply unit
C CO
2
CO
2
feed unit, for example, a diffusor
powerLED+
6. Assembly
Before starting the installation work, without fail take note of the operating
instructions of the other C0
• Fit the solenoid valve to the C0
the installation example A, B or C. In doing so, pay attention to the direction of flow.
See the arrows on the housings.
• With the union nuts, secure the C0
components.
2
storage cylinder
solenoid valve 6064 (230V AC)
storage cylinder
solenoid valve 6064380 (24V DC)
storage cylinder
solenoid valve 6064380 (24V DC)
EHEIM power supply unit
hose of the C0
2
2
CO pressure reducer
2
CO
timer switch
CO pressure reducer
2
timer switch
EHEIM Y-distributor.
CO pressure reducer
2
components.
2
fertilizer system in accordance with
2
hose to the hose connections of the solenoid valve.
14
Special hose CO
non-return valve
2
Special hose CO
CO non-return valve
2
EHEIM powerLED+
Special hose CO
CO non-return valve
2
EHEIM LEDcontrol+
EHEIM Y-distributor.
-Safe
2
CO feed
2
-Safe
2
CO
2
-Safe
2
CO
2
EHEIM