Publicité
Les langues disponibles
Les langues disponibles
Preventing accidental activation
EN
To avoid accidental activation of your product, we recommend:
When not in use, store it in a dry environment
•
•
When not in use, make sure the knob (1) is positioned in OFF
•
In the case of obvious malfunctions, if possible remove the
batteries
In case of accidental activation
In the case of accidental activation involving transmission of a 121.5 MHz
signal, the user should deactivate the W400/W400EX MSLD and notify the
appropriate search and rescue authorities (e.g., U.S. Coast Guard or
Rescue Coordination Centre serving the geographic area) at the earliest
possible time.
Periodic checks and maintenance
Our W400/W400EX MSLD does not require special maintenance, it is only
necessary to make a visual check (checking the integrity of the plastic
case) every time you proceed with a periodic test or if there is a doubt
about a possible plastic case damage and make a periodically functional
check.
Compliance with the rules of test of safety devices operating at 121.5 MHz,
the self test should be performed only within the first 5 minutes of any
hour.
Make sure the knob (1) is in the 'OFF' position, then press the
'Test/Activation' push button (5) and release it.
The check, which lasts about 12 seconds, observes the following sequence:
The red indicator light inside the flash lens (4) comes on.
The green battery charge status light inside the flash lens (4)
comes on.
Flashing of the white flash
A series of beeps in rapid succession indicating battery charge
12
Publicité
