Taurus White&Brown HORIZON 9 Mode D'emploi page 10

INSTRUCTIONS FOR USE
BEFORE USE:
• Make sure that all products' packaging has been
removed.
• Before using the product for the first time, clean
the parts that will come into contact with food in
the manner described in the cleaning section.
• Some parts of the appliance have been lightly
greased. Consequently, the first time the
appliance is used a light smoke may be detec-
ted. After a short time, this smoke will disappear.
• Prepare the appliance according to the function
you wish to use:
USE:
• Unroll the cable completely before plugging it in.
• Connect the appliance to the mains.
• Introduce the grid (L) or the cooking tray (K) on
one of the fastening levels (H).
• Select the appliance function (E) desired.
• Select the desired cooking temperature(D)
(Remind that model horizon 9 works at 250ºC)
• Turn the appliance on by selecting the time you
want it to cook.
• The pilot light (G) comes on.
• Wait until the pilot light (G) has gone out which
will indicate that the appliance has reached an
adequate temperature.
NOTE: Choose if you want an add of 3 minutes.
The applicane will last some time to reach the
desired temperature.
• During the appliance's use the pilot light (G) will
come on and off automatically, indicating the
heating elements are working, and therefore
maintaining the desired temperature.
• After the selected time the appliance will switch
off automatically.
NOTE: In order to minimize the generation of
acrilamida during the cooking process, avoid
reaching dark brown colours on the foodstuffs.
• When the food is to your taste, remove it from
the appliance with the help of a wooden spatula
or similar heat resistant implement; do not
use utensils that could damage the non-stick
coating. And remember that if the appliance
hasn't ended it's timer function, switch off the
appliance using the timer.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
• If it hasn't ended the cooking function, take it off
by using the timer.
• Unplug the appliance from the mains.
• Clean the appliance.
SAFETY THERMAL PROTECTOR:
• The appliance has a safety device, which pro-
tects the appliance from overheating.
• If the appliance turns itself off and does not
switch itself on again, disconnect it from the
mains supply, and wait for approximately 15
minutes before reconnecting. If the machine
does not start again seek authorised technical
assistance.
CLEANING
• Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
• Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
• Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
• Do not let water or any other liquid get into the
air vents to avoid damage to the inner parts of
the appliance.
• Never submerge the appliance in water or any
other liquid or place it under running water.
We advise to clean the appliance regularly and
remove any food remains.
• The following pieces may be washed in a dis-
hwasher (using a soft cleaning program):
- Cooking tray
- Grill Rack
- Rostisserie accessories.
• Then dry all parts before its assembly and stora-
ge.
ANOMALIES AND REPAIR
• Take the appliance to an authorised technical
support service if product is damaged or other
problems arise. Do not attempt to disassemble
or repair the appliance yourself as this may be
dangerous.
FOR EU PRODUCT VERSIONS AND/OR IN
CASE THAT IT IS REQUESTED IN YOUR
COUNTRY:
ECOLOGY AND RECYCLABILITY OF THE
PRODUCT
• The materials of which the packaging of this
appliance consists are included in a collection,