Problems With Your Ice Maker; Troubleshooting Guide - Summit BIM25H32 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

You can solve many common ice maker problems easily, saving you the cost of a possible service
call. Try the suggestions below to see if you can solve the problem before calling the service
technician.
PROBLEM
Ice maker does not operate.
Not producing ice
Compressor turns on and off frequently.
Vibrations
The ice maker seems to make too much noise.
The door will not close properly.
Ice cubes are melted together.
If your ice maker shows other symptoms than those described above, or if you have checked all items
listed as the cause and the problem still exists, then call SUMMIT

PROBLEMS WITH YOUR ICE MAKER

Troubleshooting Guide

1-800-932-4267
POSSIBLE CAUSE
Not plugged in.
The circuit breaker has tripped or a fuse has blown
Airflow is blocked.
The ice maker arm is set to the OFF position.
Water supply is turned off.
Water line is crimped.
Ice maker has excessive frost build-up.
The room temperature is warmer than normal.
The door is opened too often.
The door is not closed completely.
The door gasket does not seal properly.
Check to be sure the ice maker is level.
A rattling noise may come from the flow of the
refrigerant, which is normal.
As each cycle ends, you may hear gurgling sounds
caused by the flow of refrigerant in your ice
maker.
Contraction and expansion of the inside walls may
cause popping and crackling noises.
The ice maker is not level.
The ice maker is not level.
The door is reversed and not properly installed.
The gasket is dirty.
The ice bin is out of position.
Ice maker door is opened too often.
Customer Service at
®
6

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Bim25h34

Table des Matières