Care And Cleaning; Technical Data - TOOLCRAFT 1712601 Mode D'emploi

Two sets of lenses can be attached at the same time so you can flip
between them, or use together to increase magnification.
• Select desired lens then gently push into the lens bracket (9) until it locks into
place.
The curved side of the lens should be facing away from you when wearing.
• To remove the lens, carefully pull away from the middle of the lenses.
c) Adjusting the Headband
• Press and hold PUSH on the headband lock (4), then adjust the headband to fit
your head.
Tighten the visor lock screw(s) (5) if they become loose causing the visor
(1) to drop.
d) LED
• Use the LED ON/OFF switch (6) to activate/deactivate the LED light.
Do not use force to over adjust the LED light (2), this may cause damage.

Care and Cleaning

• Turn LED light off before cleaning. Do not use any aggressive cleaning agents,
rubbing alcohol or other chemical solutions as they can cause damage to the
housing and malfunctioning.
• Use a lens cleaning cloth for cleaning the lens. Alternatively, use a dry, clean, soft
and lint-free cloth or a dust brush. If necessary, you can moisten the cloth with a
little lukewarm water.
• When cleaning the lens with a cleaning agent, make sure not to directly apply the
cleaner on the lens. Always apply the cleaning agent directly to the cloth first.
• When cleaning, do not apply too much force on the lens or housing in order to
avoid damage.
Disposal
a) Product
Electronic devices are recyclable waste and must not be disposed of in the
household waste. At the end of its service life, dispose of the product in
accordance with applicable regulatory guidelines.
Remove any inserted batteries and dispose of them separately from the
product.
b) Batteries
You as the end user are required by law (Battery Ordinance) to return all
used batteries. Disposing of them in the household waste is prohibited.
Contaminated batteries are labeled with this symbol to indicate that
disposal in the domestic waste is forbidden. The designations for the heavy
metals involved are: Cd = Cadmium, Hg = Mercury, Pb = Lead batteries,
e.g. below the trash icon on the left).
Used batteries can be returned to collection points in your municipality, our stores or
wherever batteries are sold.
You thus fulfill your statutory obligations and contribute to the protection of the
environment.

Technical Data

Power supply .......................... 2 x 1.5 V AAA battery
Battery life ............................... Approx. 4 - 6 hrs (continuous use)
Illuminant ................................ 2 x LED
Color temperature ................... 6400 K (cool white)
Lens material .......................... Acrylic
Lens magnification .................. 1.2 x, 1.8 x,2.5 x,3.5 x
Lens focal lengths ................... 416 mm, 277 mm, 200 mm, 142 mm
Operating conditions ............... -10 to +40 °C, 10 – 90 % relative humidity
Storage conditions .................. -20 to +50 °C, 10 – 90 % relative humidity
Dimensions (L x W x H) .......... 260 x 200 x 60 mm
Weight .................................... 111 g (without lenses)
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights
including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represents the technical status at the time of printing.
Copyright 2018 by Conrad Electronic SE. *1712601_v2_1018_02_dh_m_4L