Safety Instructions - oneConcept Heat Spike Mode D'emploi

EN
16

SAFETY INSTRUCTIONS

When using any electrically powered product, basic safety precautions should
always be followed, including the following:
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THE
PRODUCT.
WARNING - to reduce the risk of fire, electrical shock or injury to persons or
property:
• Always operate the product from a power source of the same voltage,
frequency and rating as indicated on the product identification plate.
• Remove the unit from its packaging and check to make sure it is in good
condition before using.
• Do not let children play with parts of the packing ( such as plastic bags)
• Close supervision is necessary when the product is used by or near
children or infirm persons. Do not allow children to use it as a toy.
• Do not operate any product with a damaged cord or plug, or after the
product malfunctions, or is dropped or appears damaged in any way.
Return the complete product to the place of purchase for inspection,
repair or replacement.
• Before unplugging the power cord, be sure to turn the power off. When
touching the unit, be sure your hands are dry to prevent electrical shock.
• Ensure the cord is fully extended before use and arrange it so that it is
not in contact with any part of the heater.
• In use, some parts of the heater are hot. When moving, hold the heater
only by the handle provided.
• Do not use the heater in areas such as garages where petrol, paint or
other flammable substances are used or stored.
• Do not use near or point the heater to furniture, animals, curtains or
other inflammable objects. Keep combustible materials such as furniture,
bedding and any other combustible materials at least 1 metre from the
front and sides, and from the rear of the heater.
• Do not place the cord under carpet or cover with throw rugs or furniture.
Arrange the cord so that it cannot be tripped over.
• Do not place the heater on bedding or on thick and long pile carpet
where the openings may be blocked.
• To reduce the risk of electric shock, do not immerse or expose the
product or flexible cord to rain, moisture or any liquid other than those
necessary for correct operation of the product.
• This product should not be used in the immediate vicinity of water,
such as bathtub, washbowls, bathroom swimming pool etc. where the
likelihood of immersion or splashing could occur.
• Switch off and unplug from outlet when not in use, before assembling or
disassembling parts and before cleaning. Remove by grasping the plug -
do not pull on the cord.