Error Messages - Rotel U9901CH Mode D'emploi

 ERROR MESSAGES
o
-In the event of a power outage or if the Stop button was pressed during the ice
making process, small ice flakes may form which may obstruct the automatic ice
scoop device. If this occurs, switch off the appliance and remove the ice by pushing
the scoop.
Problem
Water level indicator (8)
is flashing
No lights are on
Ice cubes are too big
and stick together
Ice indicator (4) and
water indicator (8) are
both on
 DISPOSAL
o
For proper disposal, the unit is to return to the dealer, the service agent or the
company Rotel AG.
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
Possible cause
No water
No power
Water temperature or
room temperature is
too low
Water tank is blocked by
ice cubes
Possible solution
Press Stop (3), refill water, wait 3 minutes,
press Start (1).
Connect to the mains
Choose smaller ice cube size (5/6/7)
Unplug the appliance and remove the ice
cubes under the scoop. Plug the ice maker
back in and press the Start button (1). The
appliance will restart automatically in 2
minutes.