Maxx Ice MIM50 Mode D'emploi page 24

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Noise during
operation
The ice maker stops
suddenly while
making ice.
The body of the ice
maker is electrified
Scaling occurs
frequently inside
the machine.
Water leaks from
the ice storage bin
The feet are not leveled and
locked.
Certain sounds are normal.
The electricity is off.
The room temperature is out
of the stated range.
The ice storage bin is full of
ice.
The ground line isn't in the
socket.
The hardness level of the
water is too high.
The drainhole below the ice
storage bin is blocked.
The drain hose is kinked or
improperly placed higher
than the floor of the ice
storage bin.
Level and lock the feet. See Leveling the Ice
Maker.
See Normal Sounds.
Reconnect the power supply line.
Cut off the electricity and leave the ice
maker disconnected until the temperature
returns to within the stated range.
Remove some ice cubes; make sure the ice-
full probe is free of ice.
Use a socket meeting the grounding
requirements.
Install a water-softening device in front of
the water inlet.
Remove the ice storage bin and clean the
drainhole.
Check the drain hose to be sure water can
be drained out unhindered.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Mim50-o

Table des Matières