Charging The Speaker; Dc In (Micro Usb Port); Press On/Off Button To Switch On/Off The Unit - Bigben SYMPHONEY Mode D'emploi

Haut-parleur bluetooth diffuseur d'aromes
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
Nozzle
Nozzle
Head Cover
Head Cover
Water Tank
Water Tank
Max Water Level
X
A
M
Max Water Level
Duration
Duration
Volume Buttons
Volume Buttons
Indicator Lights
Indicatior Lights
MODE
MICRO
Micro USB Port
USB
Micro USB Port
RESET
Reset Switch/ Charging LED
Reset Switch/Charging LED

Charging the Speaker

The unit has a built-in rechargeable battery, which should be charged before using the speaker for the
first time.
The battery is charged automatically whenever the unit is connected to a computer or a USB charging
device.
The charging indicator is reflected from the Reset Switch's hole. Red LED lights up when charging and
turns off when battery is fully charged.

DC in (Micro USB port)

Using the USB charging cable connect the Micro USB plug into the Micro USB port. Connect the other
end of the cable to a laptop/PC USB output or connect to a USB adaptor (DC 5V/1A only) to charge
the unit.

Press On/Off button to switch on/off the unit

Press and hold the POWER button for 2 seconds to turn on the unit, it will have a "Beep" sound and
lights up on white.
To turn the unit off, press and hold the POWER button for 2 seconds, the unit will have a "Toot Toot"
sound and then goes off.
When the battery voltage of the unit is too low, press the power button will not turn on the unit and the
- EN 4 -

Publicité

Table des Matières
loading

Table des Matières