Line of Sight = 376 Yards
Degree of Angle = -33°
If in RIFLE mode, the ballistic group will be displayed in the bullet drop numeric field anytime that the primary
numeric display is showing dashes (i.e. no target acquired). When a target is acquired in RIFLE mode, the line of
sight distance will display in the primary numeric display. Either "IN," "MOA," "MIL," or "CM" will light next to the
bullet drop numeric display. If the bullet drop / hold over reads "
what can be displayed, and or beyond ballistic calculations and user will need to hold low.
REGULAR MODE
This mode does not provide any degree of elevation or compensated distance, but instead, line of sight distance only.
The will still appear below the line of sight numeric display, but there will not be any information displayed in this
secondary numeric display.
KNOWING WHICH BALLISTIC GROUP TO SELECT
Bushnell® engineers have worked with Sierra® Bullets ballistic programs and grouped many of the most popular
calibers and loads into eight ballistic groups (A,B,C,D,E,F,G,H). Once you know what caliber and load you are
Line of Sight = 376 Yards
Holdover/Bulletdrop = 28 Inches
," this means the compensated distance is beyond
15