Copy/Paste Function; Copy; Paste - Leviton 41920-CP8 Mode D'emploi

41920-CP8

Copy/Paste Function

When deploying identical systems across multiple rooms it is convenient to use the Copy/Paste
function built into the system. This requires the use of an empty USB memory stick with less than
4GB of storage (not supplied) and a Type A USB female to micro USB male adapter (not supplied).
The memory stick and adapter are available as a kit, Leviton P/N 41920-00K.

Copy

1. Plug the USB memory stick into the adapter and insert the micro USB male end of the adapter
into the PROGRAM port of the Autoswitching Wallplate
2. Simultaneously press and hold the SOURCE/AUTO button and the LEARN button until the
SOURCE/AUTO button begins to flash at which time you may release the buttons
3. The SOURCE/AUTO button will continue to flash until the process is finished
4. Once the SOURCE/AUTO button has stopped flashing it is safe to remove the memory stick
5. The IR codes have now been copied to the memory stick

Paste

1. Plug the USB memory stick into the adapter and insert the micro USB male end of the adapter
into the PROGRAM port of the Autoswitching Wallplate that you want to paste IR codes into
2. Press and hold the LEARN button until the SOURCE/AUTO button begins to flash at which
time you may release the button
3. The SOURCE/AUTO button will continue to flash until the process is finished
4. Once the SOURCE/AUTO button has stopped flashing it is safe to remove the memory stick
5. The IR codes have now been pasted from the memory stick to the Autoswitching Wallplate
10 DI-060-41920-25A