Huawei Ascend P6 Guide De Démarrage Rapide page 4

Masquer les pouces Voir aussi pour Ascend P6:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 8
Installing the micro-SIM and microSD
cards
Only micro-SIM cards are compatible with your P6. To
purchase or replace a micro-SIM card, contact your
service provider.
Before installing the micro-SIM or microSD card, take out
the eject tool from the headset jack. Insert the end of the
eject tool into the hole next to the micro-SIM or microSD
card tray to release it. Then, follow the directions on the
card tray to install the micro-SIM or microSD card.
After you complete these steps, you are ready to use P6.
Press and hold the power button for a few seconds until
P6 vibrates to power it on.
Be careful when using the eject tool to avoid hurting
yourself or damaging the phone. Keep the eject tool away
from children.
Don't insert or remove the micro-SIM card when your
phone is powered on.
1
3
Inserting the SIM card
a
Apply pressure to the front end of the SIM card
b
to make sure it's not portruding out as you insert
the tray into the card slot.
Once the front end of the card has been
inserted, apply pressure to the rear end of the
card and fully insert the tray into the slot.
2
2

Publicité

Table des Matières
loading

Table des Matières