Summer Infant 29626 Notice D'utilisation page 2

The handheld unit and the camera are paired at the factory for privacy reasons. If the handheld and camera
are not paired with each other for any reason, follow steps to pair:
Step 1: Move the handheld unit to the same area as the camera.
Step 2: Power on the camera AND handheld.
Step 3: Press and hold the "ON/OFF/NIGHTLIGHT
blinks repeatedly. When the blue light begins blinking, your camera is in pairing mode.
Step 4: Press the "Mode/Select
Step 5: Press the "Up/Menu
Step 6: Using the "Down/Nightlight
Step 7: Choose which of the 4 cameras you would like to pair by navigating the Left/Zoom
Right/Talkback button.
Step 8: Press the "Mode/Select
Step 9: Once successfully paired, the blue light will stop blinking and video will appear on the monitor screen.
If this is unsuccessful, you should repeat steps above making sure the camera and monitor are close enough to
each other for pairing.
Step 1: Press the "Mode/Select
Step 2: Press the "Up/Menu
Step 3: Using the "Down/Nightlight
Step 4: Use the Left/Zoom
"Mode/Select " button to delete that Camera.
Step 1: Press the "Mode/Select
Step 2: Press the "Down/Nightlight
time to switch on the red nightlight. Press the button again to switch off the nightlight.
The nightlight can also be activated by pressing the ON/OFF/Nightlight button on top of the camera.
Step 1: Press the "Mode/Select
Step 2: Press the "Up/Menu
Step 3: Use the "Down/Nightlight
Step 4: Press the "Mode/Select
every 8 seconds.
To stop scanning, press the Power/Split Screen button on top of the handheld once.
A DDI N G A DD ITI ON A L CA M E R A S/ REP LAC EM E NT PART S
Note: This product accepts up to 4 cameras and operates on audio and video auto-scan (each camera in turn
on an 8-second rotation), and split/quad screen (all cameras visible at the same time). To order an additional
camera, or if you need a replacement part, please contact our Consumer Relations Team by phone at +44 (0)
1442 505000 (option 1), by email custserviceuk@summerinfant.com, or via our website www.summerinfant.co.uk
P A IR IN G MO NI T OR & C AM ERA
" button on the handheld to enter the Utility Mode.
" button to enter the Menu.
" button to select "ADD CAM".
" button to begin pairing. A signal bar will appear once pairing begins.
" button on the handheld to enter the Utility Mode.
" button to enter the Menu.
" button to select "DELETE CAM".
or Right/Talkback button to select the Camera you want to delete. Press
" button on the handheld to enter the Utility Mode.
" button once to switch on the blue nightlight. Press the button a second
" button on the handheld to enter the Utility Mode.
" button to enter the Menu.
" button to select SCAN.
" button to switch on scanning. It will cycle through each active camera
" button on the camera for 10 seconds until the blue light
or
DE L ET E C AM E RA
NIGH T L IG HT
S C ANNING