Remington HYDRAluxe AC Hairdryer AC8901 Mode D'emploi page 4

ENGLISH
• Keep the power plug and cord away from heated surfaces.
• Do not leave the appliance unattended while plugged in.
• Do not place the appliance on any soft furnishings.
• Do not use attachments other than those we supply.
• Do not set the appliance down while still on.
• Do not twist or kink the cable, or wrap it round the appliance.
• Do not use the appliance if it is damaged or malfunctions.
• Check the cord regularly for any sign damage.
• This appliance is not intended for commercial or salon use.
PARTS
1. Outlet grille with advanced ceramic
conditioning technology
2. Heat selector switch (N,
3. Speed selector switch (0, F , E)
4. Cool shot ( )
INSTRUCTIONS FOR USE
• Wash and condition your hair as normal.
• Squeeze out excess moisture with a towel and comb through.
• Hairsprays contain flammable material – do not use while using this product.
• Attach the concentrators or diffuser by fitting it to the front of the hairdryer and
twisting clockwise to lock it. Take care when you do this because the attachments can
become hot during use.
1. Plug the product into the mains power supply.
2. Switch your hairdryer on and select the desired speed setting (low F or high E) using
the speed selector switch.
3. Select the desired heat setting (low N, Hydracare function
selector switch.
4. After use, turn the appliance off and unplug it.
5. Let the appliance cool down before cleaning or storing away.
Using the Hydracare function
• The Hydracare setting gently dries the hair at a lower temperature for healthier styling.
• To activate select the Hydracare setting (
4
5. 7 mm concentrator
6. 11 mm concentrator
, P) 7. Diffuser
8. Inlet grille
9. Hang up loop
) using the heat selector switch.
or high P) using the heat