Publicité
Les langues disponibles
Les langues disponibles
Th is appliance is intended for domestic or
similar applications, such as in
-
staff
kitchens,
commercial environments,
-
agricultural areas,
-
hotels,
motels
establishments,
-
bed-and-breakfast guest houses.
In order to comply with safety regulations
and to avoid hazards, repairs of electrical
appliances must be carried out by qualifi ed
personnel, including the replacement
of the power cord. If repairs are needed,
please send the appliance to one of our
customer
service
addresses can be found in the appendix to
this manual.
Before using for the fi rst time
–
Before the appliance is used for the fi rst
time, the blender jug and all detachable
parts must be thoroughly cleaned as
described in the section General care and
cleaning.
Operating buttons
Th e blender is equipped with 2 push-type
operating buttons.
Operating button I: low power
Operating button II: high power
When using the operating button I, the speed
can be adjusted individually by means of the
speed control.
Blender operation
–
Fit the blender attachment to the drive
unit and push it down until the drive unit
is heard locking into place.
–
Always use a suitable container for
operation. Th e blender jar provided, or
any tall container with a fl at base are
suitable.
–
Push the blender attachment down
into the ingredients in the bowl before
switching the unit on with the operation
buttons.
–
Make sure that the attachments can rotate
freely inside the bowl and are not blocked
offi ces
and
other
etc.
and
similar
departments.
Th e
during operation.
–
As soon as the operating button is
released, the blender will switch off .
Always wait until the motor has come
to a complete standstill before lift ing the
blender attachment from the mixture.
–
Remove the plug from the wall socket
aft er use.
–
To remove the blender attachment, push
both release buttons simultaneously and
pull it from the drive unit.
For maximum performance, the following
recipe may be used:
Blend 200 ml water und 300 g soy beans for
30 seconds.
Blender jug with non-slip base
Th e non-slip base is placed underneath the
blender jug to ensure a safe stand. It can also
be used as a cover for the jug.
General care and cleaning
Always remove the plug from the wall
socket before cleaning the appliance.
To avoid the risk of electric shock, do not
clean the drive unit or the power cord
with water and do not immerse them in
water. Th e drive unit may be wiped with a
slightly damp, lint-free cloth.
Do not use abrasives, harsh cleaning
solutions or sharp or pointed objects for
cleaning.
Th e blender attachments and blender jug
can be cleaned using hot water and a mild
detergent, or in a dish-washer. Caution:
the blades are extremely sharp.
Disposal
Do not dispose of old or defective
appliances in domestic garbage;
this should only be done through
public collection points.
Guarantee
Th is product is guaranteed against defects
in materials and workmanship for a period
of two years from the date of purchase.
8
Publicité
