EN
22
OPERATION OF THE COMPUTER
Specifications
Time
Speed
Distance
Calories
Odometer
Pulse
How to Install the Battery
1
Remove the battery cover at the rear of computer.
2
Place two „SIZE-AA" battery into the battery housing.
3
Insure battery is correctly positioned and battery spring is proper contact
with battery.
4
Re-install the battery cover.
5
If the display is illegible or only partial segment appear, remove battery
and wait 15 seconds before reinstalling.
MAIN FUNCTIONS
MODE:
This key lets you to select and lock on to a particular function you want.
Notes on Main Functions:
AUTO ON/OFF
•
The system turns on when any key is pressed or when it sensor an input
from the speed sensor.
•
The system turns off automatically when the speed has no signal input
or no key are pressed for approximately 4 minutes.
RESET
The unit can be reset by either changing battery or pressing the MODE key
for 3 seconds.
MODE
To choose the SCAN or LOCK if you do not want the scan mode, press the
MODE key when the pointer on the function you want which begins blinking.
00:00-99:59
0,0-99,9 KM/H (ML/H)
0,00-9999 KM (ML)
0,0-9999 KCAL
0,0-9999
0, 40~240 BPM