Publicité
Les langues disponibles
Les langues disponibles
Operating Manual
FingerTIP ID Boards
G83-144xx/145xx/14600/14700
1
Connection of the keyboard to the PC
and installation of the software
1.1 Microsoft Windows 2000 (G83-14600/
14700 only)/XP/Vista/7
1 Place the Cherry CD in your CD-ROM drive.
2 If the CD-ROM does not start automatically, double-
click the CD-ROM drive in Windows Explorer and then
the Start.exe file.
3 Select the desired software:
"Install software for smartcard reader"
– or –
"Install demo application for fingerprint"
– or –
"Install driver for fingerprint"
4 Follow the installation instructions on the screen.
5 Restart the PC.
6 Connect the USB plug of the keyboard with the USB
port of your PC.
1.2 Windows Biometric Framework
(G83-144xx/145xx only)
WBF allows you to use fingerprint identification devices
to log into Windows 7. WBF is available from Windows
Update.
1.3 Linux/Mac (G83-144xx/145xx only)
1 Install the desired software from the software folder
on the Cherry CD.
2 Connect the USB plug of the keyboard with the USB
port of your PC.
2
Disposal
Dispose of the old unit via a collecting
point for electronic scrap or via your
dealer.
2
3
Contact
ZF Electronics GmbH
Cherrystraße
91275 Auerbach
Germany
www.cherry.de
www.cherrycorp.com
E-mail: info@cherry.de
Telephone:
Sales: +49 (0) 180 5 243779* (0180 5 CHERRY*)
Technical support: +49 (0) 180 5 919108*
(*14 euro cent/min. from German landlines, prices may
vary for calls made from mobile networks.)
Please have the following information on hand when
contacting technical support:
•
Item and serial no. of the product
•
Name and manufacturer of your system
•
Operating system and, if applicable, installed service
pack version
4
General advice
Cherry, a brand of ZF Electronics GmbH, continuously
optimizes its products as new technologies are
developed. For this reason we reserve the right to make
technical alterations. The evaluation of product reliability
and the definition of the product's technical performance
are carried out according to our own requirements in
order to meet internationally recognized regulations and
standards. Requirements in addition to these can be met
through mutual cooperation. Improper usage, handling,
storage and external influences could lead to faults and
defects during use.
We do not accept warranty for defects caused by
alterations to our product by the user and shall not be
held liable for unauthorized modifications. All repairs
must be made by us or an officially appointed
organization or person.
Possible compensation claims against
ZF Electronics GmbH or its nominated officers –
whatever the legal justification including physical or
stress related injuries – are excluded. Exceptions to this
exist in the case of intent or gross negligence on the part
of ZF Electronics GmbH, infringements of Product
Liability Law or in cases of injury, bodily harm or risk to
health. These operating instructions only apply to the
accompanying product.
Full details can be obtained from your distributor or direct
from us.
Publicité
