Connecting The Speakers - Teac MC-D800 Mode D'emploi

Connecting the speakers

Connect the speaker cables that are already attached to
the included speakers to this unit's speaker terminals .
Right speaker
While pressing the lever, insert the end of the cable
(where the wire is exposed) . Release the lever to con-
nect the speaker cable .
16
Connections (continued)
Left speaker
Connect the end of the ¥ speaker cable with the red
mark to the red speaker terminal of the unit .
Connect the end of the ^ speaker cable with no mark
to the black speaker terminal of the unit .
o Gently pull the cables to make sure they are con-
nected firmly .
o Confirm that only the exposed part of the wire is
inserted into the terminal and that the cable sheath
is not touching the terminal .
o A short could occur if the exposed core wire at the
tip of a speaker cable touches another cable or
terminal .
o Never let the speaker cables short .
o In order to avoid noise, do not bundle speaker cables
with power cords or other cables .
The included speakers have bass ports in their backs .
Place the speakers so that these ports are not blocked
by, for example, other objects or walls .
Bass port
Speaker cable