Philips SmartPro Active FC8832 Mode D'emploi page 8

English
10
Charging
Charging
Charging on the docking station
Charging automatically during use
When charging for the first time and when the rechargeable battery of the
robot is empty, the charging time is four hours. Your robot can only be
charged on the docking station.
1 Place the robot on the plugged-in docking station.
2 The start/stop button starts flashing. The charging indicator will be visible
on the display during the first 3 minutes of charging.
3 When the rechargeable battery is fully charged, the start/stop button
lights up continuously.
1 When the robot has finished cleaning or when only 15% of the battery
power remains, it automatically searches for the docking station to
recharge. When the robot searches for the docking station, the light in the
start/stop button turns orange.
2 When the rechargeable battery is fully charged, the start/stop button
lights up continuously.
Note: The robot only searches for the docking station automatically when it
started cleaning from the docking station.