Manual Driving - Philips SmartPro Active FC8832 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Using the dry wipe attachment
Preparing the dry wipe attachment for use
Spiral mode
In this mode, the robot moves in a spiral pattern to clean a small dirty area
thoroughly. In spiral mode, the fan operates at turbo speed.

Manual driving

In the app, use the arrow buttons of the manual driving function to navigate
the robot through the room.
Note: Be careful when you drive the robot manually close to height
differences and staircases.
Note: The vacuuming function is off and the side brushes do not work
when the robot is driven manually. Manual driving is only meant for
maneuvering the robot.
The dry wipe attachment is a feature that allows you to clean hard floors
with dry wipes.
1 Choose cleaning with the dry wipe attachment in the app.
2 The robot starts wiping the floor without vacuuming and the side brushes
are not moving.
Note: If you use the dry wipe attachment, the robot may have trouble
crossing thresholds or climbing onto rugs.
1 Turn the robot upside down and place it on the floor or on a table.
2 Place the dry wipe on a table and place the dry wipe attachment on the
wipe with its fixation lugs pointing towards you.
English
17

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Smartpro active fc8832/01

Table des Matières