Using The Radio; Using The Cd Player - THOMSON RK300CDU Mode D'emploi

USING THE RADIO

• Set the FuNCTIoN selector to RADIo.
• Select the frequency band you want by pressing mW/Fm.
• Select the required radio station by turning the radio frequency selector, TuNING.
• Adjust the volume with the volume set knob (3).
• Unfold the telescopic aerial (26) when listening to FM stations.
In MW mode, an aerial is integrated in the radio.
To improve radio reception, turn the radio to orient the internal aerial and get the
best possible reception.
• To switch the radio off, set the oN/oFF switch (27) to oFF. Then unplug the
electrical cable.

USING THE CD PLAYER

Playing a CD
Note: Before using the appliance for the first time, remove the cardboard protecting the
lens located inside the CD compartment (5). To open the CD compartment, press
• Set the FuNCTIoN selector (2) to CD / uSB: the LCD screen (24) lights up.
• Open the CD compartment (5) by pressing
• Place an audio CD in the compartment, labelled surface up. Close the CD
compartment by pressing .
• The total number of tracks is displayed on the LCD screen (24). Press 12 to play
the disk. The disk starts playing from the first track.
• Adjust the volume with the volume set button (3).
• To pause, press 12: the 1 indicator blinks. Press this button again to resume
playing the disk.
• To stop playing the disk, press 3.
• In SToP mode, for CDs and MP3 files, and only when there are several albums:
press FoLDER uP to select the album you want, followed by 12.
Notes:
• This appliance can play audio CD disks and MP3 files.
• The CD player cannot play a disk that is dirty, damaged or not correctly inserted.
• To avoid damaging disks, never open the CD compartment while a disk is being
played. Wait until the disk has stopped.
• Never move the appliance while a CD is being played.
• This appliance must be on a flat surface.
EN 10
PORTABLE CD CASSETTE
RADIO RK300CDU
Skipping a track / Finding a specific piece
Repeat mode
During playback, press the PLAY moDE (21) button successively; the screen displays:
.
. Programmed playback
Programming up to 32 tracks in a specified order:
• While a disk is being played, or when it is stopped, you can use the 7 or 8 to
select a track, and then press the 12.
• While a CD is playing press the 8 to go to the next track. Press 7 once to go back
to the beginning of the track being played. Press this button twice to go back to the
previous track.
REPEAT REPEAT ALL
• REPEAT: repeat a track.
• REPEAT ALL: repeat all the tracks.
• ALBum: repeat an album.
• RANDom: play in a random order.
• Press PRoG: "P01" blinks on the screen.
• Press 7 or 8 to select a track.
• Press PRoG to store each track (maximum of 32).
• Press 12: the appliance plays the tracks in the programmed order.
• To stop the programmed playback, press 3 once.
• To cancel the programmed playback, press 3 twice.
USING THE CD PLAYER
ALBUM RANDOM