Installing The Casters; Assembly Overview - Homecraft KEGERATOR BK49BS Manuel D'instructions

INSTALLING THE CASTERS

NOTE: Each of the Front Casters include a locking mechanism to ensure the unit
does not roll on hard floors. The Front Casters should be fastened at the front
end of the unit, with the Non-Locking Rear Casters fastened on the rear end.
1. Empty the inside of the cabinet and lay the
unit down on it's side. To prevent dents or
scratches, we recommend placing a piece of
cardboard or cloth underneath the cabinet.
2. For the Front Casters, place Metal Washers over the
Caster bolts, then insert the Casters into the holes
on the bottom corners of the cabinet. (The Rear
Casters do not require Metal Washers.) Tighten each
Caster by turning each metal bracket clockwise.
3. Once all four Casters have been tightened, stand the cabinet in the upright position.
Locking The Front Casters
Unlocked

ASSEMBLY OVERVIEW

Tap Tower
Keg Coupler
Regulator
CO 2 Line
Locked
CO 2 Tank
8