Battery Replacement - Eldes EWKB4 Mode D'emploi

5. BATTERY REPLACEMENT

1. Open EWKB4 enclosure.
2. Remove the old batteries from the battery slots using NO
sharp tools (DO NOT use any screwdriver, knife etc.).
3. Select the appropriate battery type that is intended to be used
by sliding the battery type switch (BATSW) to the position
needed.
4. Insert the new batteries based on the battery slot positive/
negative terminals indicated on the battery slots of EWKB4.
We strongly recommend to use quality brand
batteries, such as: GP, Ansmann, Energizer.
WIRELESS LED KEYPAD EWKB4
BATSW
F3
BATSW
F3
BATSW
F3
TAMPER
Z1 COM
TAMPER
TAMPER
Z1 COM
Z1 COM
EN 15