Main Features - Eldes EWKB4 Mode D'emploi

EN
1 . GENERAL OPERATIONAL DESCRIPTION

MAIN FEATURES:

• Arming and disarming
• STAY-arming
• Violated zone bypass and bypassed zone activation
• System configuration
• PGM output control
• Built-in temperature sensor
• Wake-up on front cover opening, keystroke or keypad zone
violation
• Back-light
• Visual indication by LED indicators
• Audible indication by built-in buzzer
EWKB4 is a wireless accessory intended for ELDES alarm systems
ESIM364, ESIM384, PITBULL ALARM and PITBULL ALARM PRO.
This keypad comes equipped with 16 keys and 18 LED indicators
and a buzzer for audio indication.
Typically, the configuration of the system by EWKB4 keypad is
carried out by activating the Configuration mode using the installer
code and entering a valid configuration command using the number
keys , key for confirmation and key to clear the
0
9
*
characters that have been entered. Alternatively, the user can wait
for 10 seconds until the keypad buzzer will provide a long beep
indicating that the entered characters have been cleared. Opening
the keypad's front cover will initiate the communication with ELDES
alarm system followed by activation of the LED indicators and the
back-light lasting for 10 seconds (customizable) in case no key was
pressed. When typing in the characters, each keystroke is followed
by a short beep of the keypad buzzer, while the red indicator lights
up reflecting a respective number key that is being
0
9
pressed when typing in a configuration command (key is
0
indicated by red indicator "10"). Additionally, the LED indicators and
the keypad buzzer indicate the alarm condition.
EWKB4 comes equipped with 1 zone terminal designed for passive
wired digital sensor connection, such as magnetic door contact, and
a tamper switch located on the back side of the device for enclosure
state supervision.
10 EN WIRELESS LED KEYPAD EWKB4