Using The Remote P-T-T - Maxon 49-FX Manuel Du Propriétaire

The Maxon 49-FX will not receive a transmission
while you are transmitting. When receiving a
transmission, the TX/Busy LED will light green.
When transmitting, the TX/Busy LED will light
red. Wait until an incoming message is completed
before transmitting.
If the unit appears to malfunction, or has constant
static present, try replacing the batteries, even if
the "BATT LOW" LED has not illuminated.

USING THE REMOTE P-T-T

The radio's remote push-to-talk button has been
designed to fit the handlebar of a motorcycle,
bicycle, snowmobile, etc. A mounting strap with
hook and loop fastening material has been
provided with your 49-FX.
To use the remote P-T-T: Plug into the REM
jack on your transceiver and set the VOX/P-T-T
control dial to the P-T-T position (counter-
clockwise, as far as it will go).
10