Basic Functions - auna Bazzter Mode D'emploi

BASIC FUNCTIONS

TURNING THE UNIT ON/OFF
Press the power ON/OFF button to switch the unit on/off.
Note: In USB/BT/AUX/LINE IN mode, when the unit is not providing the
main function for around 15 minutes, the unit will automatically switch
into standby mode. Press the FUNCTION/
unit again.
Please note that low volume setting in the audio source may be recognized
as "no audio signal", this will affect the capability of signal detection from
the device and can also originate an automatic switch into standby mode. If
this happens please reactivate the audio signal transmission or increase the
volume setting on the audio source player in order to resume playback.
SETTING THE FUNCTION MODE
To change the function modes, press the FUNCTION button repeatedly to
choose RADIO/USB/BT/AUX/LINE IN function.
ADJUSTING THE VOLUME
1. Rotate the VOLUME knob on the unit to increase or decrease the music
volume.
2. Press the MIC VOL. button on the unit to increase or decrease the
microphone volume.
BASS ADJUSTMENT
Press the SUPER BASS button on unit to increase the bass effect.
button to turn on the
STANDBY
EN
17