Hasselblad 30mm Distagon CF Mode D'emploi page 6

'
L
Distance scale (feet and
8. Shutter speed scale
meter)
9. External and internal
2. Central index
bayonet mount
3. Infrared index
10. Shutter speed ring
4. Depth-of-freld scale
I l.
F setting (2000FC only)
5. Aperture scale
12. Detent for F setting
6. Button for cross-coupling
13. Depth-of-field preview tab
of shutter diaphragm
14. Flash synchronization terminal
7. Exposure value scale 15. Focusing ring
CF lenses
The 80mm 72.8 Planar CF lens is the standard Hasselblad lens. Lenses
designed for the 500C/M and 500EL/M are designated as CF lenses. CF
lenses can also be used with the 2000FC and the 2000FC/M, either with the
optic's own built-in leaf shutter or with the camera body's focal plane
shutter. CF lenses incorporate a Prontor CF leaf shutter with an automatic
diaphragm, exposure value scale, and X synchronization. The lenses attach
to the camera with a bayonet mount.
Changing lenses (Fig. I )
Attachment
Make sure the camera is cocked and not pre-released. Also ensure that the
lens will point to the red index dot (B) when the lens is cocked. See "Shutter
Cocking" below for cocking untensioned lenses.
Insert the lens into the camera body with the red marking on the lens
opposite the camera body's red marking (O). Twist the lens clockwise until it
locks firmly in place with a click.
Removal
Make sure the camera is cocked (white signal in the film-wind reminder
window 20) and not pre-released. (See "Pre-release" in the camera